EVGA 131-CL-E499 Specs And Initial Installation Download Page 92

Page: 92 / 165

EVGA Z490 DARK (131-CL-E499)

- 92 -

Fan Header DC and PWM setup

The Z490 DARK supports both 4-pin PWM fans and 3-pin DC fans. The motherboard

uses eight 4-pin fan headers, including 2x CPU FAN (PWM), a CHA FAN (PWM/DC),

a PWR FAN (PWM/DC), 3x SYS FAN (PWM/DC), and an AUX FAN (PWM/DC).
You can locate each header on Pages 14 and 15, component numbers 3 and 4.
To configure the fans in BIOS/UEFI, first power on / restart the PC. During the

POST sequence, press [Delete] repeatedly to get into the BIOS. Once in the BIOS, use

the arrow keys or your mouse to navigate, whichever is easier, and make your way to the

“Advanced” – “H/W Monitor Configuration” menu.

Summary of Contents for 131-CL-E499






































































































































































Search results

Summary of Contents for 131-CL-E499

Reviews:

Related manuals for 131-CL-E499

Brands by name

Popular brands

EVGA 131-CL-E499, Specs And Initial Installation

Search results

Summary of Contents for 131-CL-E499

Reviews:

Related manuals for 131-CL-E499

Brands by name

Popular brands