EVGA 122-CK-NF63-TR User Manual Download Page 88

Page: 88 / 170

Configuring the BIOS

Base Memory

640K

Extended Memory

1047552K

Total Memory

1048576K

All, But Diskette

The system boot does not stop for a diskette error but will stop for all other
errors.

All, But Disk/Key

The system boot does not stop for a keyboard or disk error, but will stop for
all other errors.

Memory

These settings are

display-only values

that are determined by the BIOS POST

(Power-On Self Test).

Base Memory

BIOS POST determines the
amount of base (or conventional) memory installed in the system.

Extended Memory

BIOS determines how much extended memory is present during the POST.

Total Memory

This value represents the total memory of the system.

Summary of Contents for 122-CK-NF63-TR











































































































































































Search results

Summary of Contents for 122-CK-NF63-TR

Reviews:

Related manuals for 122-CK-NF63-TR

Brands by name

Popular brands

EVGA 122-CK-NF63-TR, User Manual

Search results

Summary of Contents for 122-CK-NF63-TR

Reviews:

Related manuals for 122-CK-NF63-TR

Brands by name

Popular brands