OPERATION :
TOOL-SPECIFIC FEATURES
Directional Exhaust Deflector
Depth of Drive Adjustment
Loosen screw as shown. Adjust to desired exhaust
direction and tighten screw.
Loosen screw with 4mm hex key.
Move sliding shoe down (away from
nose) to decrease the drive of depth
(shallow) or up (toward the nose) to
increase the drive of depth (deep).
Tighten screw with 4mm hex key.
The “DEPTH OF DRIVE ADJUSTMENT” feature provides close control of the fastener drive depth; from flush with the work
surface to shallow or deep countersink. First, set the air pressure for consistent drive in the specific work as described
above, then use the “DEPTH OF DRIVE ADJUSTMENT” to give the desired depth of drive.
ALWAYS disconnect air supply before performing following adjustment.
WARNING
17
Summary of Contents for SN65Q
Page 20: ...20...
