6
SPECIFICATIONS
TOOL SPECIFICATIONS
MODEL
SCN65 / SCN65T / SCN65-ST
SCN66 / SCN66-ST
HEIGHT
11.7" (297 mm)
11.4” (290 mm)
WIDTH
5" (127 mm)
5.7” (146 mm)
LENGTH
10.7" (272 mm)
11.4” (290 mm)
WEIGHT
5.0 lbs. (2.3 kg)
5.2lbs. (2.3 kg)
RECOMMENDED OPERATING
PRESSURE
70 to 120 PSI (5 to 8 bar)
LOADING CAPACITY
200~400
300
AIR CONSUMPTION at 90 PSI
(6 bar) pressure
0.023
ft
3
(0.66 liter/cycle)
FASTENER SPECIFICATIONS
MODEL
SCN65 / SCN65T / SCN65-ST
SCN66 / SCN66-ST
NAIL LENGTH
Wire: 1-
1/2”
- 2-
1/2”
(38 - 65 mm)
Plastic: 1-1/4" - 2-1/2"
(32 - 65 mm)
1-
1/4”
- 2-
1/2”
(32 - 65 mm)
SHANK DIAMETER
.083" - .099" (2.1- 2.5 mm)
.080”
-
.110” (2.0
- 2.8mm)
HEAD DIAMETER
.179”
-
.275” (4.5 –
7.0 mm)
.215
”
- .236
” (
5.5
–
6.0 mm)
SHANK TYPE
Smooth, Ring, Screw
COLLATION
15
Wire / Plastic Sheet
0
Plastic Sheet
TOOL AIR FITTING
This tool uses a 1/4
”
-18 N.P.T. or 1/4
”
-19 P.T. male plug. The inside diameter should be .28
0”
(7 mm) or larger.
The fitting must be capable of discharging tool air pressure when disconnected from the air supply.
OPERATING PRESSURE
70 to 120 PSI (5 to 8 kg/cm
2
). Select the operating pressure within this range for best fastener performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
TECHNICAL DATA
AIR CONSUMPTION
Tool air consumption:
2.3 cfm (1.1 liter/sec)
of free air to operate at the rate of 100 nails per minute, at 90 PSI
(6.0 kg/cm2). Take the actual rate at which the tool will be run to determine the amount of air required. For
instance, if your fastener usage averages 50 nails per minute, you need 50% of the tool air consumption in
running at 100 nails per minute.
NOISE
A-weighted single-event sound power level LWA, 1s
,
106.0 dBA
A-weighted single-event emission sound pressure level at work station LpA 1s,
d
103.2 dBA
These values are determined and documented in accordance to EN12549.
