IXG CloudBridge
Internet Exchange Gateway Server
Page - 38
Revision 1.0
5.5.1.
Stream Control
Profile Name:
This parameter allows the user to set the
name for the IP stream profile.
Enable:
This dropdown allows the user to enable or disable the proxy.
AES Encryption Enable:
This dropdown allows the user to enable or disable AES Encryption.
MultiCast Subscription Address:
This parameter allows the user to set The Multicast IP address of the
target transport stream entering the IP access port.
Source UDP Port:
This parameter allows the user to set the
UDP port for the transport stream entering
the IP access port.
Destination IP Address:
This parameter allows the user to set the
Unicast IP address for the destination
device. This would be the Evertz cloud software address, or the address of the IXG CloudBridge Server-R
that you wish to target.
Destination UDP Port:
This parameter allows the user to set the
Destination UDP port for the destination
device. This would be the Evertz cloud software address or the address of the IXG CloudBridge Server-R
that you wish to target.
ARQ Port:
This parameter allows the user to set ARQ port for retransmission requests over the internet.
NOTE: Failure to set this, and allow it through any firewalls will prevent any retransmission requests,
giving little to no protection for your stream. Make sure this value is different than any UDP port for video
data.
Restart:
This control allows the user to restart the individual TX side Proxy.
5.5.2.
FEC
Row:
This parameter allows the user to define FEC row count.
Column:
This parameter allows the user to define FEC column count.
FEC Port:
This parameter allows the user to define FEC destination port.
5.5.3.
Stream Status
Name:
This parameter returns the
name of the individual IP stream.
Running:
This parameter returns whether the IP stream is running or not: Yes or No.
5.5.4.
Receive Status
Port:
This parameter returns the
IP Stream Receive port number.
Bit Rate:
This parameter returns the IP Stream Received bit rate.
Packet Loss:
This parameter returns the IP Stream Received packet loss.
Total Packets:
This parameter returns the IP Stream Received total packets.
5.5.5.
Transmit Status
UDP Port:
This parameter returns the IP Stream Transmit UDP port.
ARQ Port:
This parameter returns the IP Stream Transmit ARQ Port.
