IXG CloudBridge
Internet Exchange Gateway Server
Revision 1.0
Page - 17
2) Also check the link speed and data rate. This will confirm the communication between the card and
the destination.
Figure
4-11 : WebEASY
®
- IP Input
3) After checking the access port link on the RX side, verify the IP configuration of the internet ports
on both the TX and RX sides. The “Destination IP” on the TX side (under the Internet Output IP
stream tab) must match the “Source IP” of the RX side (under the Internet tab). For example: if the
TX side is directly connected to the Internet, then this IP is the public internet IP of the RX side.
