IXG CloudBridge
Internet Exchange Gateway Server
Revision 1.0
Page - 7
4.
SETUP GUIDE
This section will outline initial network management setup and transmission of the IXG CloudBridge
Server. Basic setup of a single transmit to a single receiver is outlined.
4.1.
INITIAL SETUP USING DVA PORT AND USB PORTS
•
Power up the server.
•
Connect VGA port to the monitor through VGA cable and connect a keyboard and a mouse in USB
ports. This will allow the user to initially setup the card.
•
This will take you to the login page and will allow you to access the initial settings of the server.
Figure
4-1 : Cloudbridge Server Login
•
Login and password is “
customer
”.
•
Type 1 to go to network setup, 2 for SNMP setup, and 3 for engineering debug tool and press
enter. For example if you want to change the IP address of the card, type 1 and press enter.
