HD2014, HD2012, HD2011 Video Passport
TM
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
Page 5-22
Revision 0.1
FRONT PANEL OPERATION
0 to 1079
5.1.2.35.
Setting the Output H Start
The
Output H Start
control determines where to place the selected portion of the input image onto the
output video raster. The
Output H Start
control defines the starting horizontal position for the video
content on the output image raster. The input image will be stretched to fill the width defined by
Output
H Start
and
Output H Stop
. Areas of the output image raster not filled with video content will be filled
with the pre-defined panel colours.
VIDEO
Processing
Converter
Path 1
Scaler
Output H Start
0 to 1919
To set the
Output H Start
control, enter a value between 0 and 1919
into the
Output H Start
field.
5.1.2.36.
Setting the Output H Stop
The
Output H Stop
control determines where to place the selected portion of the input image onto the
output video raster. The
Output H Stop
control defines the ending horizontal position for video content
on the output image raster. The input image will be stretched to fill the width defined by
Output H Start
and
Output H Stop
. Areas of the output image raster that are not filled with video content will be filled
with the pre-defined panel colours.
VIDEO
Processing
Converter
Path 1
Scaler
Output H Stop
0 to 1919
To set the
Output H Stop
control, enter a value between 0 and 1919
into the
Output H Stop
field.
5.1.2.37.
Setting the Output V Start
The
Output V Start
control determines where to place the selected portion of the input image onto the
output video raster. The
Output V Start
control defines the starting vertical position for video content
on the output image raster. The input image will be stretched to fill the width defined by
Output V Start
and
Output V Stop
. Areas of the output image raster that are not filled with video content will be filled
with the pre-defined panel colours.
VIDEO
Processing
Converter
Path 1
Scaler
Output V Start
0 to 1079
To set the
Output V Start
control, enter a value between 0 and 1079
into the
Output H Start
field.