evertz HD2011 User Manual Download Page 51

Page: 51 / 91

HD2014, HD2012, HD2011 Video Passport

1RU Multi-Path Video Converter, Frame Synchronizer and Decoder

FRONT PANEL OPERATION

Revision 0.1

Page

5-17

5.1.2.23.

Enabling the RGB Clip

The

RGB Clip

control enables and disables the converter’s internal RGB clipper/colour legalizer.

When enabled, the module will clip any illegal levels of R, G, and B (individually) to black and white
levels. This control is normally set to

Disable

in order to allow for super black or other test patterns to

pass through the module.

VIDEO

Processing

Converter

Path 1 to 4

Proc

rgbClip

Enable
Disable

Enable

- When enabled, the module will clip any illegal levels of R, G,

and B (individually) to black and white levels. If disabled, then the
illegal values are passed unmodified.

Disable

- This control is normally set to

Disable

in order to allow for

super black or other test patterns to pass through the module.

5.1.2.24.

Setting the Gamma Adjust

The

Gamma Adjust

control enables and disables the converter’s ability to adjust gamma.

VIDEO

Processing

Converter

Path 1 to 4

Proc

gammaAdjust

Enable
Disable

Enable

- When enabled, the module will allow the user to adjust the

gamma level.

Disable

- If disabled, then the gamma level is set to 0.

5.1.2.25.

Setting the Gamma Level

With the

Gamma Level

control, the user can adjust the Gamma correction factor.

VIDEO

Processing

Converter

Path 1 to 4

Proc

gammaLevel

-128 to 127

To set the gamma level, enter a value between -128 and 127 into the

gamma level

field.

Summary of Contents for HD2011




























































































Search results

Summary of Contents for HD2011

Reviews:

Related manuals for HD2011

Brands by name

Popular brands

evertz HD2011, User Manual

Search results

Summary of Contents for HD2011

Reviews:

Related manuals for HD2011

Brands by name

Popular brands