manualshive.com logo in svg

evertz HD2011, User Manual

Share
Download
evertz HD2011 User Manual Download Page 66

HD2014, HD2012, HD2011 Video Passport 

TM

 

1RU Multi-Path Video Converter, Frame Synchronizer and Decoder 

Page 5-32  

Revision 0.1

 

FRONT PANEL OPERATION 

5.1.4.3. 

Setting the Brightness 

The 

Brightness 

control allows the user to adjust the brightness of the analog video output.    

 

Video 

 

AnalogOut 

 

CompositeOut

 

 

Brightness 

 

-32 to 32 

 

To set the brightness, enter a value between -32 and 32 in the 

brightness

 field.  Level -32 corresponds to -15.9 IRE and level 32 

corresponds to +15.9 IRE. 
  

 

5.1.4.4. 

Setting the Chroma Filter Selection 

The chroma information for the encoded video signal may be filtered with a number of filter bandwidths 
ranging from 650k to 3.0 MHz. The 

Chroma Filter

 control, selects which chroma filter will be applied.  

 

Video 

 

AnalogOut 

 

CompositeOut

 

 

chromaFilter 

 

650kHz  
1.0MHz 
1.3MHz 
2.0MHz 
3.0MHz 

 

The chroma filter options are listed below: 
 

650kHz:

 

650k chroma filter applied. 

1.0MHz:

 

1.0 MHz chroma filter applied. 

1.3MHz:

 

1.3 MHz chroma filter applied. 

2.0MHz:

 

2.0 MHz chroma filter applied. 

3.0MHz:

 

3.0 MHz chroma filter applied. 

 

5.1.4.5. 

Setting the Contrast 

The 

Contrast

 control allows the user to adjust the contrast of the analog video output.  

 

Video 

 

AnalogOut 

 

CompositeOut

 

 

contrast 

 

0 to 768 

 

To set the contrast, enter a value between 0 and 768 into the 

contrast

 

field.  The default value is 512. 
 
Level 0 corresponds to 0% 
Level 512 corresponds to 100% 
Level 768 corresponds to150%. 

 

5.1.4.6. 

Enabling Force Black and White 

The 

Force Black and White

 control enables the user to force black and white video to be generated 

on the analog video output.  
 

Video 

 

AnalogOut 

 

CompositeOut

 

 

forceBlackAndWhite 

 

On 
Off 

 

Select 

on

 to make the composite analog video output black and 

white.  Select 

off 

to enable colour video on the composite output. 

 

 

Summary of Contents for HD2011




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands