evertz EMX Series, User Manual

Page: 18 / 28

EMX Series Multiframes
Page - 10
Revision 1.6
2.6.1. Configuring Basic Network settings
To make changes to the IP address select Network Setup . Set the IP address of the B Network as well
as the Netmask and the Gateway . Make the same changes for the IP address and Gateway of Network
A and C as required. When done
Exit (X)
the Network Setup and
Save and Exit (X)
from the Main Menu
to ensure all changes are saved. Reboot the card to ensure the changes take effect.
Figure 2-7: Tera Term Network Configuration
2.6.2. Ethernet Connection
For the EMX6 and EMX3 frames, ensure the Ethernet connection is made through Ethernet port 1B. For
the EMX1 frame, ensure the Ethernet connection is made through Ethernet port 1.