CP-1024E
Control Panel
Page 4
Revision 1.1
The CP1024E also supports an optional (100 to 240 volts AC at 50 or 60 Hz) 12 VDC power adapter.
Power should be applied by connecting a 3-wire grounding type power supply cord to the power
adapter. Plug the 12 VDC output of the power adapter into the DC power jack on the rear of the control
panel, and secure it by turning the fastening nut.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING OF THE
GROUND PIN OF THE MAINS PLUG MUST BE MAINTAINED
2.2. MOUNTING
The CP-1024E is equipped with rack mounting angles and fits into a 19 inch by 3.5 inch by 1.75 inch
(483 mm x 89 mm x 45mm) rack space.
Cooling is achieved by fan-assisted convection. Air is drawn into the right side of the chassis and
expelled as hot air from the left side of the chassis.
"
When installed in the equipment rack, ensure that the air flow from the right and left
side vents is not blocked or restricted.
