7700 MultiFrame Manual
7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver
Page - 14
Revision
2.0
4.2.2.1.
Displaying Input ASI Status Information
This menu item displays information contained in the input DVB-ASI stream. Parameters such as
Total
TS Bit Rate
,
Null Packet Bit Rate
,
Useful Bit Rate
,
Number of Active PID’s
, and
Number of Continuity
Count Errors
can be displayed. To display the
ASI Status Information
from the
STAT
menu, use the toggle
switch/pushbutton to select the
IASI
menu and then choose one of
RATE, NULL, DATA, PID,
or
CCER
under
ASI(1 & 2).
STAT
IASI
ASI1, ASI2
RATE
NULL
DATA
PID
CCER
The following indications are possible:
RATE
Total TS Bit Rate
NULL
Null Packet Bit Rate
DATA
Useful Bit Rate
PID
Number of Active PID’s
CCER
Number of Continuity Count Errors
4.2.2.2.
Displaying the Total Input ASI Bandwidth Used
This menu selection displays the sum of the 2 input channel bandwidths. To display the
Total Input
Bandwidth
used from the
STAT
menu, use the toggle switch/pushbutton to select the
IASI
menu and then
choose
IPBW
,
followed by
USED
.
STAT
IASI
IPBW
USED
The following indications are possible:
USED
Combined Input Bandwidth
4.2.2.3.
Displaying Output ASI Status Information
This menu selection displays various information contained in the output DVB-ASI stream. Parameters
such as
Total TS Bit Rate
,
Null Packet Bit Rate
,
Useful Bit Rate
, Number of Active PID’s, and
Number of
Continuity Count Errors
can be displayed. To display the
ASI Status Information
from the
STAT
menu, use
the toggle switch/pushbutton to select the
OASI
menu and then choose one of
RATE, NULL, DATA,
PID,
or
CCER
under
ASI(1 & 2)
.
STAT
OASI
ASI1, ASI2
RATE
NULL
DATA
PID
CCER
The following indications are possible:
RATE
Total TS Bit Rate
NULL
Null Packet Bit Rate
DATA
Useful Bit Rate
PID
Number of Active PID’s
CCER
Number of Continuity Count Errors
