evertz 7707VB-8-ASI-OC3 Manual Download Page 5 | Manualshive

Page: 5 / 32

background image

7700 MultiFrame Manual

7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver

Revision

1.0

Page - 1

1. OVERVIEW

The 7707VB-8-ASI-OC3 is a

Vista

LINK

®

enabled, OC-3/STM-1 (155.52Mb/s) fiber transceiver for DVB-

ASI video signals. The card also has a built-in 10/100/1000 Base T Ethernet transceiver port. This dual
fiber single card combines 8 asynchronous DVB-ASI signals using Time Domain Multiplex (TDM)
technology. A companion 7707VB-8-ASI-OC3 card acts as a demultiplexer for the incoming signal and
converts them back to separate ASI video feeds, while utilizing a separate fiber for the outgoing signal.

Monitoring and control of card status and parameters are provided locally at the card edge or remotely via

Vista

LINK

®

.

The fiber output is available in an assortment of optical wavelengths, accommodating standard, CWDM or
DWDM transmission schemes.

7707VB13-8-ASI-OC3

1310 nm FP

-7dBm output, suitable for distances up to 50 km

7707VB15-8-ASI-OC3

1550 nm DFB

0dBm output, suitable for distances up to 75 km

There are several versions with built in isolators specifically suited to coarse wave division multiplexing
(CWDM) applications. These versions all have 0dBm output and are suitable for distances up to 75 km.

7707VB27-8-ASI-OC3

1270 nm DFB

7707VB29-8-ASI-OC3

1290 nm DFB

7707VB31-8-ASI-OC3

1310 nm DFB

7707VB33-8-ASI-OC3

1330 nm DFB

7707VB35-8-ASI-OC3

1350 nm DFB

7707VB37-8-ASI-OC3

1370 nm DFB

7707VB43-8-ASI-OC3

1430 nm DFB

7707VB45-8-ASI-OC3

1450 nm DFB

7707VB47-8-ASI-OC3

1470 nm DFB

7707VB49-8-ASI-OC3

1490 nm DFB

7707VB51-8-ASI-OC3

1510 nm DFB

7707VB53-8-ASI-OC3

1530 nm DFB

7707VB55-8-ASI-OC3

1550 nm DFB

7707VB57-8-ASI-OC3

1570 nm DFB

7707VB59-8-ASI-OC3

1590 nm DFB

7707VB61-8-ASI-OC3

1610 nm DFB

There are several versions with built in isolators specifically suited to dense wave division multiplexing
(DWDM) applications. The DWDM versions are suitable for distances >120 km (for DWDM applications
contact the factory).

7707VBDyyy-8-ASI-OC3

DWDM DFB laser output, yyy – ITU channel number

The 7707VB-8-ASI-OC3 occupies three card slots in the 3 RU frame, which will hold up to 5 modules.

«
...
3
4
5
6
7
...
»

Summary of Contents for 7707VB-8-ASI-OC3

































Reviews:

No comments

Related manuals for 7707VB-8-ASI-OC3

Brand: Manaras Opera Pages: 4

Brand: ECD Pages: 75

Brand: Target Pages: 8

Brand: Camille Bauer Pages: 30

Stage-100 Series

Brand: Parallel Audio Pages: 12

Brand: Monacor Pages: 52

Brand: Retekess Pages: 2

Brand: ADTRAN Pages: 24

Brand: Zamel Pages: 4

Yellobrik ORX 1400

Brand: Lynx Pages: 2

Ipify EUP-2704R-4T-PKG

Brand: Intercoax Pages: 2

Brand: R.V.R. Electronica Pages: 40

1301-1214-0010-200

Brand: S+S Regeltechnik Pages: 32

Brand: Radionode Pages: 20

Brand: Yaesu Pages: 34

NEO-FiberLink-2

Brand: G&D Pages: 32

Brand: M-system Pages: 2

Brand: Doro Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands