570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0
Page - 39
6.7.1. Rx Input Monitor
Input State:
This parameter returns the status of the input i.e. if the input stream is present/active or
missing/inactive.
Num Programs:
This parameter displays the number of programs associated with the input.
Transport Stream ID:
This parameter returns the transport stream ID associated with input.
Network Name:
This parameter returns the Network Name of the Input.
PSD Service Type:
This monitor returns the service type read from the Evertz private service descriptor (79)
from the PMT. It provides an enumerated string as follows:
•
Digital Tv
•
Digital Radio Teletext
•
NOVD Reference
•
NVOD Timeshifted
•
Mosaic
•
PAL Signal
•
SECAM Signal
•
DMAC
•
FM Radio
•
NTSC Signal
•
Data Broadcast
N/A
- meaning that a valid service type was not found, or there is no private descriptor.
PSD Provider Name:
This monitor returns the provider name read from the Evertz private service descriptor
(79) from the PMT.
PSD Program Name:
This monitor returns the program name read from the Evertz private service descriptor
(79) from the PMT.
PSD Network ID:
This monitor returns the network id read from the Evertz private service descriptor (79) from
the PMT.
6.7.2. Decoder Input Program Control
Program Tuning Mode:
This parameter allows user to select the program tuning mode of the decoder.
Auto PID Select
automatically tunes to the incoming transport stream. When
Manual PID Select is
configured, the user has to manually enter the required video and audio pids to tune to.
The
recommended setting is Auto PID select with Auto Program Sel Mode configured to First Program in
PAT.
Auto Program Sel Mode:
This control allows the user to set how the decoder will select a program for
decoding when
Program Tuning Mode
is set to auto.
•
In
First Program In PAT
mode, audio PIDs will be chosen from the first program.
•
In
Lowest Program Num,
audio PIDs will be selected from lowest program.
•
In
Specific Program Select
mode, audio PIDs will be selected from specific program, specified
by
Program Number Select
control, for decoding.
Program Number Select:
This control allows selecting the program which the decoder will decode.
This control is only applicable when the
Program Tuning Mode
is set to Auto PID Select
