evertz 570ASI-X19-10GE2, User Manual

Page: 20 / 40

570ASI–X19-10GE2 Series
User Manual
Page - 10
4.1.1. Control Port Configuration
For Eth0 or USB0
MAC Address: This field displays the MAC Address of the 570ASI–X19-10GE2.
IP Address: This field allows the user to enter the IP address to be assigned to control port of the
570ASI–X19-10GE2.
Netmask Address: This field allows the user to enter the Netmask address for the device control port.
4.1.2. Data Port Configuration
For SFPP 1-6
IP Address: This parameter allows the user to set the data port’s IP address.
Netmask: This parameter allows the user to set the data port’s Netmask.
Gateway: This parameter allows the user to set the data port’s Gateway.
4.1.3. Data Port Monitor
For SFPP 1-6
Port Link Status: This field displays the link status of the port.
Received Data Ethernet Total Bitrate: This field displays the total bitrate (in Kbps) that has been
received.
Transmitted Data Ethernet Total Bitrate: This field displays the total bitrate (in Kbps) that has been
transmitted.
Rx Frame Count: Counter for good frames received on the trunk.
Rx CRC Error Frame Count: Counter for CRC Error frames received on the trunk.
Rx Undersized Frame Count: Counter for undersized frames received on the trunk.
Rx Oversized Frame Count: Counter for oversized frames received on the trunk.
Tx Frame Count: Counter for good frames transmitted on the trunk.
Tx Oversized Frame Count: Counter for oversized frames transmitted on the trunk.
4.1.4. SFP Monitor
For SFPP 1-6
SFP Part Number: This parameter shows the part number of SFP model installed.
SFP Type: This parameter shows the type of SFP installed.
SFP Rx Power level: This parameter shows the SFP’s received power level.
SFP Tx Power level: This parameter shows the SFP’s transmitted power level.