evertz 570ASI-X19-10GE2 User Manual Download Page 1

Page: 1 / 40

570ASI-X19-10GE2 Series

User Manual

EVERTZ MICROSYSTEMS LTD.

5292 John Lucas Drive

Burlington, Ontario

Canada L7L 5Z9

Phone:

+1 905-335-3700

Sales:

[email protected]

Fax: +1 905-335-3573

Tech Support: [email protected]

Fax: +1 905-335-7571

Web Page:

http://www.evertz.com

Version 1.0, March 2020

The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of

purchasers of the 570ASI–X19-10GE2 series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than

the operation of the 570ASI–X19-10GE2 series product. Due to on going research and development, features and specifications in this manual

are subject to change without notice.

this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

Summary of Contents for 570ASI-X19-10GE2









































Search results

Summary of Contents for 570ASI-X19-10GE2

Reviews:

Related manuals for 570ASI-X19-10GE2

Brands by name

Popular brands

evertz 570ASI-X19-10GE2, User Manual

Search results

Summary of Contents for 570ASI-X19-10GE2

Reviews:

Related manuals for 570ASI-X19-10GE2

Brands by name

Popular brands