2432RX2-HDMI
Dual Path Serial Digital to HDMI Converter
Page - 18
Revision 1.0
UPGRADING FIRMWARE
1.
Print VPROC CTRL Numbers
(Output 1 or 2): Prints out a list of all VPROC controls and current
values.
Figure
4-12 : Print VPROC CTRL Numbers
•
Gain Level Controls
There are eight controls that set the gain of the video. With these controls, the user can adjust the
gain of the 3 components in either the Y, Cr, Cb domain or the R, G, B domain over a range of -
50% to 100% in 0.1% steps. Gain adjustments in the Y, Cb, Cr domain are made first, and then
gain adjustments in the RGB domain. Illegal values are clipped after gain adjustments.
Y Gain:
Ranges from –50% to 100% in 0.1% increments.
Cb Gain:
Ranges from –50% to 100% in 0.1% increments.
Cr Gain:
Ranges from –50% to 100% in 0.1% increments.
R Gain:
Ranges from –50% to 100% in 0.1% increments.
G Gain:
Ranges from –50% to 100% in 0.1% increments.
B Gain:
Ranges from –50% to 100% in 0.1% increments.
Saturation Gain:
Ranges from –50% to 100% in 0.1% increments.
Video Gain:
Ranges from –50% to 100% in 0.1% increments.
•
DC Offsets
There are three controls that set the DC Offset of the video signal. With these controls, the user
can individually adjust the DC offset of Y, Cr and Cb with a range of +/- 200 quantization levels.
Y Offset:
Ranges from –200 to 200 quantization levels in 1 level increment.
Cb Offset:
Ranges from –200 to 200 quantization levels in 1 level increment.
Cr Offset:
Ranges from –200 to 200 quantization levels in 1 level increment.
R Offset:
Ranges from –200 to 200 quantization levels in 1 level increment.