evertz 2432RX2-HDMI User Manual Download

Page: 11 / 70

2432RX2-HDMI

Dual Path Serial Digital to HDMI Converter

OVERVIEW

Revision 1.0

Page - 1

OVERVIEW

The 2432RX2-HDMI is a versatile dual path serial digital to HDMI converter. The 2432RX2-HDMI is used

for projects where high density extension of HDMI over coax or fiber is required. 2432RX2-HDMI is used

as part of the EFX system for video wall and command center projects.

This self-contained module accepts up to two serial, G-Link (Evertz proprietary) inputs over coax or fiber

(with additional SFP) and converts them to single link or dual link HDMI with a resolution range of a up to

WQXGA (2560x1600). The possibility to support two paths simultaneously makes the 2432RX2-HDMI a

very cost effective professional AV solution.

2432RX2-HDMI can also be used in applications to convert SDI to HDMI. Supports all major SMPTE

standards: SMPTE 259M, 292M, 425M-A, 425M-B and G-Link (Evertz proprietary)

Features & Benefits:

•

Supports two dual independent serial digital inputs over coax up to 3Gbps

•

Supports SMPTE standard serial digital inputs as well as G-Link (Evertz proprietary)

•

Optionally support two dual fiber inputs via a hot-pluggable SFP

•

VESA video resolutions supported up to WUXGA (1920x1200/60) when using Single Link HDMI

•

VESA video resolutions supported up to WQXGA (2560x1600/60) when using Dual Link HDMI

•

Full 24 bits-per-pixel color resolution

•

Supports Crop and Scale functionality

•

Ideal for use with high resolution LCD, plasma, and projection screens

•

Superior digital data transmission

•

Compact form factor with optional VESA mount brackets (2400VESA)

•

Supports single-mode and multi-mode fiber optic cable (contact factory for options)

•

Two stereo analog audio outputs or AES output

•

SNMP enabled for configuration

•

HDCP compliant

Summary of Contents for 2432RX2-HDMI







































































Search results

Summary of Contents for 2432RX2-HDMI

Reviews:

Related manuals for 2432RX2-HDMI

Brands by name

Popular brands

evertz 2432RX2-HDMI, User Manual

Search results

Summary of Contents for 2432RX2-HDMI

Reviews:

Related manuals for 2432RX2-HDMI

Brands by name

Popular brands