1275T / 1285T Series
Digital Clock Display
Page - 12
Revision 1.0
OPERATION
4.3.1. Setting the Input Source
IP
With this menu item, you can select the source of time and date
information.
When set to
LTC,
the 1275T/1285T series displays will use time and date
information from the LTC input.
When set to
LTC ND,
the 1275T/1285T series displays will use time but
not date information from the LTC input. When in this mode, it is important
to enter the date manually. This is useful when the data had no date
information since this looks like Legacy format date of January 1, 1980.
When set to DQS the 1275T/1285T accepts Evertz DQS protocol
timecode.
When set to
NONE,
the 1275T/1285T series displays will free run on its
internal crystal. The user must set the time and date using the
ST
and
SD
menu items. When the power fails, the time will be kept by the battery
backed up clock and will be restored on power up.
LTC
LTC ND
DQS
NTP
NONE
4.3.2. Setting the Time Zone Offset
TZ
With this menu item, you can select the time zone offset that will be
applied from the time displayed.
The Time zone offsets can be set from 0 to 23.5 hours in one half hour
intervals. The time zone offset will be applied when displaying time or
date from one of the input sources selected by the
IP
menu item
00:00
..
11:30
12:00
-12:00
-11:30
..
00
