8 Troubleshooting
78/ 106
e’line User Manual
|
© Eversys AG
8.3
FAQs
8.3.1
Bean hoppers unlocked
The coffee dispensed is watery.
The bean hopper is empty or closed so no beans have access to the grinder.
Fill or lock the bean hoppers.
See chapter “5.4 Fill the coffee bean hoppers” on page 40
8.3.2
No water connected
The main water tap (usually under the counter) or the coffee machine water tap (under the drip tray)
are closed.
Open all the water taps.
See chapter “1.7 Special safety instructions and signs” on page 15
See chapter “5.2 Switch on” on page 38
8.3.3
No milk dispensed
No milk is dispensed, but the milk tank in the refrigerator is not empty.
Check that the milk is cold enough (4-5 °C). Always fill the milk tank with pre-cooled milk.
Check that the end of the milk in-take tube lay on the bottom of the filled milk tank.
Check that the milk tube is not pinched and in good condition.
8.3.4
Steam wand is clogged
The steam wand needs to be purged before and after every product preparation.
See chapter “5.6.5 Steam purge button” on page 42
8.3.5
Cups on the cup heater are not warm enough.
Cups can be topped up to a maximum of 2 layers to have an effective cup heating function.
The cup heater is not intended to keep cups warm in a cold air flow (e.g. near an open window or
door).
See chapter “5.5 Cups heating panel” on page 40
Not using the purge will slowly block the pipe inside. Make purging your regular procedure.
