EVERSPRING EVR HSP02 Manual Download

Page: 2 / 6

2. Put the included CR2 battery in the battery compartment.

3. The recommended position for a PIR Detector is in the corner of a room mounted at a height between 1.8

and 2.0 m. At this height, the detector will have a maximum range of up to 9 m with a field of view of 110°.

The monitoring range can be set up with PCB pattern.

Summary of Contents for EVR HSP02

Page 2: ... The recommended position for a PIR Detector is in the corner of a room mounted at a height between 1 8 and 2 0 m At this height the detector will have a maximum range of up to 9 m with a field of view of 110 The monitoring range can be set up with PCB pattern ...

Page 3: ... the battery cover which is also the mount plate and the screws Further fix the sensor with mount plate like shown in the picture b For mounting the sensor in a corner use the lateral holes of the mount plate Further fix the sensor with mount plate like shown in the picture ...

Page 6: ...tion Groups 1 Devices controlled by open close events max nodes in group 5 Technical Data Battery Type 1 CR2 Explorer Frame Support No SDK 5 02 pl2 Device Type Slave with routing capabilities Generic Device Class Binary Sensor Specific Device Class Routing Binary Sensor Routing No FLiRS No Firmware Version 1 3 ...