Operation Instructions
3
2 Safety instructions and regulations
2.1 Intended use
The Eversol inverter converts the DC power generated by the photovoltaic (PV)
modules into AC power and feed this into the power supply. Eversol inverters are
built according to the safety rules. However, improper use may cause lethal hazard
for the operator, third parties or the units and other property. Meanwhile, any other
or additional and mobile use is prohibited. Alternative use, modifications to the
Eversol or the operation of inverter not expressly recommended by Eversolar New
Energy will invalidate the warranty claims.
2.2 Safety operating instructions
1.
The inverters must be installed by an authorized skilled electrician who is
responsible for observing existing standards and regulations. In addition,
opening of the inverter, and any electrical installation, repair or modification of
the inverter may also only be performed by authorized skilled electrician.
2.
The Eversol may only be operated with PV generators. Do not connect any
other sources of energy to the Eversol.
3.
Some part of the Eversol housing become hot during
operation, and sometimes the temperature can reach 60
℃
in normal operation. Don’t touch that part for danger
of burn.
4.
Don’t lay flammable and explosive materials close to the system.
5.
Be sure that the system is out of the children’s reach.
6.
Don’t put any things on the inverter.
7.
Before cleaning, disconnect the system from the power grid by opening the AC
breaker and open the DC switch on the PV generator, in order to exclude the
danger of electric shocks. Don’t touch the inverter in five minutes. Use a soft,
dry cloth to clean the system. Never use corrosive, solvent-containing or
abrasive cleaners or polishes.