70
28
58
61
4
6
1
27
58
59
60
6
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlast.com
ASSEMBLY INSTRUCTIONS
IMPORTANT - ASSEMBLE WITH ALL NUTS AND BOLTS LOOSE AT FIRST, ONLY TIGHTEN AFTER
COMPLETING ALL ASSEMBLY STEPS.
1. UNPACK THE CARTON AND PLACE ALL PARTS ON THE FLOOR.
2. CAREFULLY REMOVE ALL PACKING MATERIAL AND CHECK EACH PART WITH THE MANUAL FIRST.
3. REMEMBER SOME PARTS ARE PRE-FITTED TO LARGER COMPONENTS.
STEP 1
1. Attach the Front Stabilizer (6) onto the front curve of the Main Frame (1) with 2pcs x Carriage Bolt (60), 2pcs
Flat Washer (58) and 2pcs x Cap Nut (59). Tighten cap nuts with the Multi Hex Tool provided.
2. Attach the Rear Stabilizer (4) onto the front curve of the Main Frame (1) with 2pcs x Hexagon Bolt (61), 2pcs x
Flat Washer (58) and 2pcs x Cap Nut (59). Tighten cap nuts with the Allen Wrench S6 provided.
3. The Cranks, Pedal Shafts, and Foot Pedals are marked “R” for Right and “L” for Left.
4. Insert pedal shaft of Left Foot Pedal (27) into threaded hole in the left crank. Turn the pedal shaft by hand in
counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the threads.
5. Tighten the pedal shaft of Left Foot Pedal (27) with the Multi Hex Tool with Phillips Screwdriver provided.
6. Insert pedal shaft of Right Foot Pedal (28) into threaded hole in right crank. Turn the pedal shaft by hand in
clockwise direction until snug. Tighten the pedal shaft of Right Foot Pedal (28) with the Multi Hex Tool with
Phillips Screwdriver provided.
