38
3
7
5
1
51
50
46
66
65
8
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlast.com
ASSEMBLY INSTRUCTIONS
STEP 3
1. Remove 3pcs x Flat Washer (66) and 3pcs x Nylon Nut (65) from underside of the Seat Cushion (46). Guide
bolts on underside of the Seat Cushion (46) through holes on top of the Slide Tube (7), attach with removed
3pcs x Flat Washer (66) and 3pcs x M8 Nylon Nut (65). Tighten nylon nuts with Multi Hex Tool with Phillips
Screwdriver provided.
2. Attach the Slide Tube (7) to the Seat Post (5) with Knob (50) by turning it in a clockwise direction to lock the
Slide Tube (7) in the suitable position.
3. Insert the Seat Post (5) into the Seat Post Plastic Bushing on the tube of the Main Frame (1) and then attach
the M16 Seat Height Adjustment Knob (51) onto the tube of the Main Frame (1) by turning it in a clockwise
direction to lock the Seat Post (5) in the suitable position.
4. Turn the M16 Seat Height Adjustment Knob (51) in a counterclockwise direction to release the Seat Post (5)
and then slide the Seat Post (5) up or down slightly to the desired hole for the suitable position. Lock the Seat
Post (5) in place by tightening the Seat Height Adjustment Knob (51) in a clockwise direction.
5. Adjusting the Seat Back and Forth Turn the Knob
(50) in a counterclockwise direction to release the
Slide Tube (7) and then slide the Slide Tube (7) back
or forth slightly to the desired hole for the suitable
position. Lock the Slide Tube (7) in place by tightening
the Knob (50) in a clockwise direction.
NOTE: When adjusting the height of seat post, make
sure the seat post plastic bushing does not exceed
the mark line on the seat post.
