Carefully unpack each component, checking against the parts fist that you have all the necessary parts to complete the assembly of your product.
Please note that as part of our production checking and for your convenience, all nut, cap, where necessary, have been fitted in the
pre-packing stage.
Stage A
1. Lay the Back Base Frame (02) flat on the floor. Put two
outside-end caps (36) to back base frame (02). Slide two
Rubber Cushions (27) down Weight Guide Tubes (06). Insert
the 2 Weight Guide Tubes (06) into the 2 outer holes in the
Back Base Frame (02), secure them with 2 x M10 x 20mm
Hex Bolts (54), 2 x M10 Washers (63).
2. Connect the Front Base Frame (01) and the Back Base
Frame (02) together using 2 x M10 x 65mm Hex Bolts (56), 4
x M10 Washers (63) and 2 x M10 Nylock Nuts (66).
3. Connect the Main Frame (03) and the Front Base Frame
(01) together using 2 x M10 x 65mm Hex Bolts (56), 4 x M10
Washers (63) and 2 x M10 Nylock Nuts (66).
4. Connect the Base Plate (35) and the Front Base Frame (01)
together using 2 x M10 x 60mm Hex Bolts (57), 4 x M10
Washers (63) and 2 x M10 Nylock Nuts (66).
ASSEMBLY INSTRUCTIONS
No. Description
Q'ty
56
Hex Bolt (M10 x 65mm)
4
54
Hex Bolt (M10 x 20mm)
2
57
Hex Bolt (M10 x 60mm)
2
63
Washer (M10)
14
66
Nylock Nut (M10)
6
27
Rubber Cushion
2
8
HOME GYM
HELP LINE NUMBER: 08456 400800
ev
-700
