Customer Service 1-888-707-1880
11 Maurice Pincoffs Canada Inc. © 2010
LCD DISPLAY INSTRUCTIONS
PROGRAM:
Display programs for selection during setup, from P1 to P10.
Displays the selected program during exercise.
TIME:
Displays the time.
Counts upward from one second to 99:59 minutes. Counts down from preset
value.
SPEED/RPM:
Displays the current speed from zero 99.9 miles per hour, or RPM from zero to
999 RPM.
Press the
MODE
button to select the display of SPEED or RPM.
DISTANCE:
Displays the distance from zero to 999.9 miles.
CALORIE/WATT:
Displays the calorie consumption from zero to 999.9 WATT.
Press the MODE button to select the display of CAL or WATT.
NOTE:
The calories and watt readouts are an estimate for an average user. It
should be used only as a comparison between workouts on this unit.
HEART RATE:
Displays heart rate in beats per minute from 40 to 240 beats per minute.
To display the heart rate, you must grasp the Pulse sensors on both sides of the
handrail, one in each hand. The heart symbol “
♥
” will begin flashing when the
computer senses your hear rate. Your heart rate will be displayed approximately
five (5) seconds after the heart icon is displayed. If you do not place your hands
correctly and 60 seconds passes without a heart rate reading, the computer will
turn off the heart rate circuit. If this occurs, press the
MODE
button to restart the
heart rate circuit, place your hands back on the Pulse Sensors correctly, and the
heart rate readout will appear.
PROGRAM DESCRIPTIONS
This computer contains 10 different programs. You can preset the program time and the computer will
divide the time chosen into 10 intervals. If you do not set the programs time in advance, the computer
will default to a 30 minute workout time.
MANUAL PROGRAM:
P1 is a manual program allowing the user to full manual
control of the workload. Use the “
▲
” button to increase
load. Use the “
▼
” button to decrease the load.
