67
To Set Schedule using Mouse
1.
Click on desired start time block (no numbers on it) on a time bar. At this time, the selected time block
will be highlighted in blue frame and the entire time bar will be highlighted by red frame. There are 24
blocks on the time bar representing 24 hours respectively.
2.
Set a schedule start time by clicking on a desired start time block on a time bar. Click again to confirm,
and a new sequence number (for this new section) will show on this block and the current and all
following blocks will turn to gray. This means this new gray timezone has a new record mode (No
record).
3.
Change the timezone/section to different record mode (which shows a different color) by clicking on the
first (numbered) block of any section. The color switches from gray -> orange -> blue, every time the
user clicks the first block of a section.
4.
Repeat clicking on the first block (indicated by a sequence number on it) of any timezone, this timezone
will change from one color to another, which means switching the record mode. The color switch
sequence is gray->orange->blue.
Schedule Setting from front panel
1.
Enter schedule setting mode: press Enter button to enter schedule setting mode. At this time, the
whole editing area at right-down side will be highlighted within a blue frame. See below image.
2.
Enter camera selection mode: turn Jog knob to switch to Camera selection mode. When Camera
selection mode is selected, all 32 cameras will be highlighted in a blue frame. See below image.
Summary of Contents for PARAGON264x4 series
Page 10: ...3 Power cord x 1 Mouse x 1 DVR x 1 User manual x 1...
Page 112: ...105...
Page 113: ...106...
