EverFocus PARAGON264x4 series, Instruction Manual

Page: 61 / 143

54
4.5 ALARM & EVENT SETTING
Figure 4-10 is a screenshot of the ALARM & EVENT SETTING MENU. This menu will guide you through
alarm and event setup.
Figure 4-10 Alarm & Event Menu - Alarm
4.5.1 Alarm
Alarm: Select the alarm input trigger connection number from 1 to 16.
Enable: Check box to enable response to that alarm trigger.
Matrix: Select the Matrix number you wish to configure.
Monitor: Matrix monitor display options when an alarm event occurs.
No change: No change on the matrix monitor display.
Spot: A full screen of the event camera will display on the matrix monitor. Although the sequence is on
going, the matrix monitor will display alarm image of the selected camera for 2 seconds and return to
sequence process.
Log: Check box to record these alarm events in the log.
Pre-alarm Record: Check box to start copying recorded video to the hard disk from 5 seconds before the
alarm event. (Pre-alarm recording rate will follow the “Normal” frame rate setting)
Buzzer: Check this box to enable the buzzer when an alarm occurs.
Main Monitor: Main monitor display options when an alarm occurs.