![EverFocus PARAGON264x4 series Instruction Manual Download Page 68](http://html1.mh-extra.com/html/everfocus/paragon264x4-series/paragon264x4-series_instruction-manual_2443295068.webp)
61
HD Off:
Figure 4-16 Alarm & Event Menu – Event - HD Off
Buzzer: Check box to enable buzzer if the hard drive is turned off (disconnected) or becomes disabled
(cannot be detected by the system).
Email Notify: Check box to enable email notification when HD is off. Email operation requires that valid
email settings have been entered in the Network Setting/Email setup screen.
Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and
setting up Alarm Server in Network Setup menu)
Alarm Output: This will transmit a signal through the alarm output relay. It can be set to either “NONE” (not
active), “1”(active), “2”(active), “3”(active) or “4” (active).
Output Type: Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will be continuously active until user presses “Enter” key.
Transparent: Alarm output remains active until event ends.
Trans+Timeout: Alarm output continues until event ends, then lasts for the set time duration.
Timeout Duration: The amount of time the buzzer sounds when the HD is off. Duration selectable from 1
to 150
seconds.
Summary of Contents for PARAGON264x4 series
Page 10: ...3 Power cord x 1 Mouse x 1 DVR x 1 User manual x 1...
Page 112: ...105...
Page 113: ...106...