104
number of the IP address. For example, if the IP address of the computer is 192.168.2.101, the
DVR’s IP address should be 192.168.002.050.
¾
To access the DVR from a computer simply open Internet Explorer and in the address bar type:
http:// (IP address of the DVR)
Note: The DVR’s IP address will only work at the location of the DVR. To connect from a
different location over the Internet, see below.
To set DVR for Internet Connection through router
¾
The next step is to open ports within your router. Log into the router using a PC and open the
following ports.
o
Paragon ports to open: 80, 1600
o
If your Internet service provider blocks port 80, you can change it to a different port in the
DVR’s Network Menu Setup.
o
For router port settings, please contact the router manufacturer.
¾
To access the DVR from a computer simply open Internet Explorer and in the address bar type:
http:// (the IP address given by your internet service provider)
Note: If you changed to a different port other than 80, you will need to include this at the
end of the IP address
Example:
http://70.20.70.20
:8100
¾
If you have a Dynamic IP address and have opened the ports, go to the next chapter to setup
DDNS.
Summary of Contents for PARAGON Series
Page 1: ...Instruction Manual P Pa ar ra ag go on n S Se er ri ie es s D DV VR R...
Page 103: ...97...
Page 104: ...98...
