ED610e
15
AUTO
The camera will switch to DAY (Color) mode or NIGHT (B&W) mode
according to the selected values.
•
BURST: Turn the BURST function off to reduce the color noise when the
camera switches to B&W mode. If the camera cannot switch back to
COLOR mode from B&W mode, please turn the BURST function on.
Note:
The BURST function can also be switched on/off in the B&W
mode’s submenu.
•
DELAY CNT: The Delay Count will keep the camera from unnecessarily
switching between Day and Night modes when there is a sudden and
short change in the light levels. The camera will switch from one mode to
the other only if a switch-inducing change in light levels stays the same
for the selected number of seconds. The selectable values are 0 to 255
seconds.
•
DAY
NIGHT: When the camera detects the current light level is lower
than this value, it’ll switch from DAY mode to NIGHT mode. Selectable
values are 0~255.
•
NIGHT
DAY: When the camera detects the current light level is higher
than this value, it’ll switch from NIGHT mode to DAY mode. Selectable
values are 0~255.
Submenu of the
DAY / NIGHT
** DAY/NIGHT **
BURST
DELAY CNT
OFF
|
|
||||||||||||||||||| 005
DAY->NIGHT
||
|
|||||||||||||||||| 003
NIGHT->DAY
|||||||
|
||||||||||||| 025
RETURN
<┘