ED610e
13
PUSH
Select this setting if you want the camera to automatically trace the white
balance without the same range limitations that apply to ATW.
USER 1
Select this mode when the color temperature is around 3200°K (when
surrounded by sodium lights). Press ENTER if you want to access the setting
options. Set the B-Gain and the R-Gain.
USER 2
Select this mode when the color temperature is around 6300°K. Press ENTER
if you want to access the setting options. Set the B-Gain and the R-Gain.
ANTI CR (Color rolling suppression)
Select this mode (
ANTI Color Rolling)
to suppress color rolling incidents.
MANUAL
This mode enables more precise adjustments. Increase and/or decrease the
level of white balance to suit the light in the surveillance area.
PUSH LOCK
To find this mode’s optimal setting for the surveillance area’s luminance
environment, point the camera towards a sheet of white paper before
entering the PUSH LOCK adjustment sequence. Press the ENTER button
while pointing the camera at the sheet. Ideally, this adjustment sequence
should be repeated whenever the luminance environment changes.
Note:
The
WHITE BALANCE
cannot
function effectively under the following
conditions. When the following occurs, please select
PUSH LOCK
Mode.
1.
When the color temperature in the surveillance area is high.
2.
When darkness surrounds a surveillance area.
3.
When there’s a fluorescent light in the surveillance area or the light
changes all the time.
6.6 D-WDR (DIGITAL WIDE DYNAMIC RANGE)
To switch D-WDR on, scroll to the D-WDR line
and use your RIGHT button to scroll to ON.
Click ENTER to enter the settings submenu.
Select your desired Luminance and Contrast
values (LOW to HIGH).
** SETUP MENU **
LENS
AUTO<
┘
SHUTTER / AGC
AUTO<
┘
NR
<
┘
WHITE BALANCE
ATW<
┘
D-WDR
ON<
┘
BACKLIGHT
OFF
DAY/NIGHT
AUTO<
┘
NEXT<
┘
EXIT<
┘