EPTZ3602/3602i
37
1.
OUTPUT NUM: Select Output number from 1~2.
2.
INPUT1: Select YES to enable Alarm input 1 for the alarm output selected. Select NO to disable Alarm
input 1.
3.
INPUT2: Select YES to enable Alarm input 2 for the alarm output selected. Select NO to disable Alarm
input 2.
4.
INPUT3: Select YES to enable Alarm input 3 for the alarm output selected. Select NO to disable Alarm
input 3.
5.
INPUT4: Select YES to enable Alarm input 4 for the alarm output selected. Select NO to disable Alarm
input 4.
6.
MOTION: Select YES to have alarm output triggered when a motion event is detected. Select NO to
disable this function.
7.
SYSTEM ERROR: Select YES to have alarm output triggered when system error occurs. Select NO to
disable this function.
8.
REMOTE: Select YES to have alarm output triggered when RS485 failure occurs. Select NO to disable
this function.
9.
RETURN: RETURN to the previous menu.
MOTION DETECT
Press Enter key of keyboard to enter MOTION DETECT sub-menu. You can set 4 motion areas.
1.
Turn the joystick Left or Right to select ON for motion detection. A window as below pops up.
MOTION DETECT 1
OFF
MOTION DETECT 2
OFF
MOTION DETECT 3
OFF
MOTION DETECT 4
OFF
SENSITIVITY
240
INTERVAL TIME (S)
1
EXIT
MOTION DETECT INFO
M1: 67 M2: 87
ALARM INPUTS
<┘
ALARM OUTPUTS
<┘
MOTION DETECT
<┘
EXIT
