EPN4122/4122i/4220/4220i/4220p/4220pi
35
6.2
Setting Up the Playback Function
Note that the Playback function will not be active until the user has inserted a micro SD card in the
camera’s micro SD card slot. The card may also have to be formatted in the Settings submenu.
6.2.1
Preparing the Micro SD Card
Once you insert a functional Micro SD card into the slot, the Playback button on the Live page
should become active within seconds (see section
6.2.2
below – the grey letters should turn white).
IF NOT, do the following:
1.
From the Live page, click Settings > System > SD Card. If no card has been inserted yet, the
Remove button should be faded, indicating that no card is being detected. (If a card is inserted,
and the Remove button is still faded, pull the card out and re-insert it.)
2.
Slide the card into the slot until it clicks into position.
3.
The Remove button should become active within a few seconds, indicating the card is active.
4.
If the Remove button stays faded, click the Format button to format the card. NOTE: All data
on the disk will be deleted if the Format button is clicked.
