44
5.3.3
Motion
Figure 5-4 Camera Menu – Motion
Camera:
Select the camera you wish to adjust. “Title” will change to the title name of the selected camera.
Enable:
Check box to enable motion detection. Other motion options will not be available unless this
feature is selected.
Log:
Check box to record motion events in the log.
Main Monitor:
Monitor display options when a motion event occurs.
No change: No change on the main monitor display.
Full screen: A full screen of the active camera will display on the main monitor.
Pre-alarm Record:
Check box to record several moments before the motion event. (Pre-alarm recording
rate will follow “
Normal
” frame rate setting)
Buzzer:
Check box to enable buzzer when a motion event is triggered.
Email Notify:
Check box to send email notification when a motion event is detected.
Network Alarm:
Check box to send out a network alarm to client PC when motion occurs. (requires
PowerCon software and setting up Alarm Server in Network Setup menu)
Alarm Output:
This will transmit a signal through one of the alarm outputs. It can be set to either “
NONE
”
(not active) or “
1
”.
Output Type:
Output action when motion is triggered.
Timeout: Alarm output lasts for the set time duration.
Summary of Contents for ELR-4
