ECOR960 X1
40
4.4
Display
You can display system and camera status on the live view screen. Follow the steps below:
1.
Right-click to display the OSD Root Menu or press the
Display
button on the front panel to
display the system and camera status.
2.
The following icons will be displayed at the top-left side of each camera stream to show each
camera’s status.
Recording
Playback
Fast forward Fast backward
Back
pause
Alarm
Motion
Video loss
Express copy
Audio out
3.
The following icons will be displayed at the bottom of the monitor to show the system
status..
Alarm
Audio
Event
HDD failure
HD temp. too high
Motion
Video loss
No network
Seq.
4.
There are four display modes, and you can click the
Display
icon or press the
Display
button
on the front panel to change the display mode: (1) Display the camera and system status
icons. (2) Display only the camera status icons. (2) Display only the system status icons. (4)
Hide both the camera and system status icons.
4.5
Sequence
The sequence function is used to display each channel in sequence and for the configured
amount of time. The default setting is channels 1~16 with a dwell time of 3 seconds each –
repeated. Please refer to
6.8.2 Main M/T SEQ
and
6.8.3 Call M/T SEQ
for detailed information.
To enable this function:
By Mouse:
Click the
Sequence
button
to enter the sequential switching mode.
By Front Panel:
Press the “SEQ” button on the front panel to enter the sequential switching
mode.
