EverFocus ECOR264-16X1, User Manual

Page: 62 / 147

54
4.5 ALARM & EVENT SETTING
Figure 4-10 is a screenshot of the
ALARM & EVENT SETTING MENU
. This menu will guide you through
alarm and event setup.
Figure 4-10 Alarm & Event Menu - Alarm
4.5.1 Alarm
Alarm:
Select the alarm input trigger connection number from 1 to 4 (or 9 or 16 – one trigger per camera
input).
Enable: Check box to enable response to that alarm trigger.
Log:
Check box to record these alarm events in the log.
Pre-alarm Record:
Check box to start copying recorded video to the hard disk from 5 seconds before the
alarm event. (Pre-alarm recording rate will follow the “ Normal ” frame rate setting)
Buzzer:
Check this box to enable the buzzer when an alarm occurs.
Main Monitor:
Main monitor display options when a motion occurs.
No change: No change on the main monitor display.
Full screen: A full screen of the active camera will display on main monitor.
Call Monitor:
Call monitor display options when a motion occurs.
No change: No change on the call monitor display.
Full screen: A full screen of the active camera will display on call monitor.