EverFocus ECOR Series Instruction Manual Download

Page: 26 / 105

# $

This chapter introduces the operations on major functions including playback, layout change, sequence,
triplex operations, archive, and search.

By default, the ECOR series DVR will always be in record mode. When the DVR is turned on, it will start to
record.

The exceptions are:

ECOR will not record any disabled cameras (Refer to section 5.3.1 for more detail)

If a schedule is active, ECOR will follow the record settings of the schedule.

& !

' # $

In order to access ECOR options, users will be asked to log in for authority identification. To log in, follow
these steps.

1. Click on the Menu icon or press “

” button to bring up the following screen:

Figure 4.1 (Login page)

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for ECOR Series










































































































Search results

Summary of Contents for ECOR Series

Reviews:

Related manuals for ECOR Series

Brands by name

Popular brands

EverFocus ECOR Series, Instruction Manual

Search results

Summary of Contents for ECOR Series

Reviews:

Related manuals for ECOR Series

Brands by name

Popular brands