manualshive.com logo in svg

Everex StepNote NC1200, User Manual

Share
Download
Everex StepNote NC1200 User Manual Download Page 89

Customizing Your Notebook 

6

 

•

 

Save Changes 
Saves Setup data to CMOS. 

6.7  How to Upgrade the BIOS 

Your computer uses EPROM Flash BIOS chip that allows you to easily 
upgrade the BIOS program. When you update the BIOS, any customized 
settings you made are lost. 

To upgrade the BIOS: 

1.

 

Put in the BIOS Update data into the USB device. 

2.

 

Power on the system with the USB device inserted in the USB port. 

3.

 

On the DOS prompt, type the following command. 
 

A:\>Phlash 

XXXXXX.ROM

 (

BIOS filename)  or 

A:\>

XXXXXX.BAT

 (

Batch file for BIOS file) 

Press <Enter> to run this BIOS utility. After the system has been 
successfully run this program, a message similar to the following appears: 
 

Flash memory has been successfully programmed, 

press any key to restart the system. If the 

system does not restart, turn it off, then turn 

on again.

 

4.

 

Press any key to restart this system. 

Contact your dealer for the latest BIOS update file. 

89 

 

Summary of Contents for StepNote NC1200














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands