DESIGNED TO PERFECTION
NOTE: Care should be taken that the range hood is fitted correctly (see diagram below). Incorrect
installation can cause a build up of grease and oils and cause damage to the unit.
NOTE: Remove all protective plastic coatings from the stainless steel surfaces before use.
OPERATING INSTRUCTIONS
Note: Before the unit can be operated, it must be ducted.
Connect the plug into the power.
PUSH BUTTON OPERATED RANGEHOODS
The range hood has indication diagrams to allow you to easily select the fan operating speed required.
Push the low button, indicated by a fan with 3 blades, and the motor will run at a low speed.
Push the medium button, indicated by a fan with 4 blades and the motor will run at a medium speed.
Push the high button, indicated by a fan with 5 blades and the motor will run at a high speed.
Push stop button, indicated by an (O) and the motor will stop.
Push the light button, indicated by a lit globe and the two lights will come on. Push it again and the light will
turn off.
Lo
w
Mi
d
Hi
gh
Li
gh
t
St
op
Lo
w
Mi
d
Hi
gh
Li
gh
t
St
op
Lo
w
Mi
d
Hi
gh
Li
gh
t
St
op
REPLACING THE BULBS
1. Switch the unit off and disconnect from mains power first.
2. Remove the light chrome rims by turning in anti-clockwise direction.
3. Pull out the halogen light bulb carefully and replace by same type and same rated halogen light bulb (12V
G4 base 20W MAX).
4. Assembly the chrome rims back to the unit.
6
6
