THE EVOLUTION OF HEATING
GENERAL HEATER PARTS
LCD INDICATORS (MAIN UNIT & REMOTE CONTROL)
GETTING STARTED
1. Carefully remove the heater from the plastic bag and the carton.
2. Place the heater on a stable and flat surface.
3. Set the main power switch to the ’OFF’ position (see diagram on above right). Plug the cord set into a
220-240V~A.C. 50Hz earthed electrical outlet. Turn the main POWER switch to the ’ON’ position. A ’beep’
sound and the blue LCD will come on indicating that there is power to the unit (it will turn off again after 10
seconds). The heater is now ready for use. Refer to the function setting section below for the full operation of
your heater.
ON Position
OFF Position
