THE EVOLUTION OF HEATING
4. WARM A BIGGER SURFACE AREA (OSC - OSCILLATION)
: Pressing the ‘OSC’ button will allow the heater
to oscillate. The heater can oscillate up to 70
o
. To stop the oscillation, press the ‘OSC’ button once more. (see
figure below)
5.
SET THE SLEEP TIMER (TIMER):
The timer function allows you to set the length of operation of your heater
from 0.5 hour to 7.5 hours. Pressing the ‘Timer’ button repeatedly will increase the length of operation by 0.5
hour each time. The sleep timer can be set in any mode.
6. TURN OFF WHEN NOT IN USE. To turn the heater OFF, press the ‘POWER’ button. The unit will work in the
COOL FAN MODE for 30 seconds then turn itself off.
REMOTE CONTROL OPERATION
1.
lnstall two “AAA” (not included) batteries by sliding the bottom panel of the battery body.
2.
The Remote Control Power button is labelled as such. All the functions performed with the Remote Control
work identically to the Manual Controls.
3.
When changing modes or setting the timer, it is recommended to have the unit in non-oscillation mode and the
remote control preferably aligned to the LCD panel. This will enable better communication between the remote
control and the main unit. The change in function is confirmed by a beep by the main unit. Always check the
LCD of the main unit to confirm that you are in the correct mode (or have set the correct time).
IMPORTANT: as per the requirements of the approval regulations on safety, when the unit receives the instruction
from the remote control precisely, the working status of the unit will be updated with the status shown on the remote
control. This will ensure that the unit's working status is kept the same as the remote control's working status at that
time.
LCD Display
Touch
Controls
Battery Body
OSCILLATION (OSC) INDICATOR
-
When this symbol is displayed, your unit
is in oscillation mode.
TIMER INDICATOR
-
When this symbol is displayed, it indicates
the length of operation of your unit (sleep
timer only).
