THE EVOLUTION OF HEATING
FUNCTION SETTING
The heater may be operated by the manual controls located on the heater (refer to the MANUAL OPERATION
section) or by your remote control (refer to the REMOTE CONTROL OPERATION section).
MANUAL OPERATION
1.
TURN THE UNIT ON (POWER)
: Turn the heater ON by pressing the ‘POWER’ button; the LCD of the unit will
display the current ROOM temperature. Upon turning the heater on, the unit will be in the default HIGH HEAT
MODE and the ionizer will automatically switch on (the ionizer cannot be switched off on its own).
2. SET THE FUNCTION YOU WANT (MODE)
: Pressing the ’MODE’ button will set the heater into different
FUNCTIONS or MODES. Your heater has 4 modes: COOL FAN, LOW HEAT, HIGH HEAT and AUTO. (See
figures below).
DISPLAY ON UNIT
COOL FAN MODE
- The heating element is turned off and the unit is
operating with the fan only. This mode is
indicated by FAN on the LCD. The UP and DOWN
buttons are disabled in this mode.
