background image

776-1005 

rev. 04/02/20

TROUBLESHOOTING

Important:

 Service jacks are self-contained devices used for lifting, but not sustaining, a partial vehicular load. In accordance with ASME PASE-2019 Load Sustaining 

Test: “A load not less than the rated capacity…shall not lower more than 1/8" (3.18mm) in the first minute, nor a total of .1875" (4.76mm) in 10 minutes.” Lowering 
within this range is considered normal operation and is NOT a warrantable defect.

OWNER/USER RESPONSIBILITY

The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this jack. Personnel involved in the use 

and operation of equipment shall be careful, competent, trained, and qualified in the safe operation of the equipment and its proper use when servicing motor vehicles 
and their components. Warning information should be emphasized and understood. If the operator is not fluent in English, the manufacturer’s instructions and warning 
shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents. 
Owner and/or user must study and maintain for future reference the manufacturers’ instructions. Owner and/or user is responsible for keeping all warning labels and 
instruction manuals legible and intact. Replacement labels and literature are available from the manufacturer.

  INSTRUCTION MANUAL

PROBLEM

ACTION

1. Unit will not lift  rated load.

Purge air from hydraulic system by following procedure under SETUP.

2. Unit will not sustain rated load or feels “spongy” under rated load.

Purge air from hydraulic system as above.

3. Unit will not lift to full height.

Purge air from hydraulic system as above.

4. Handle tends to raise up while the unit is under rated load.

Pump the handle rapidly several times to push oil past ball valves in power unit.

5. Unit still does not operate.

Contact your place of purchase for details on handling warranty.

LIMITED WARRANTY

180 DAYS LIMITED WARRANTY:

 EVERCRAFT lifting equipment is warranted to be free from defects in material and workmanship. If any unit proves to be defective in material 

or workmanship within 180 days from the original date of purchase, it will be replaced free of charge. In the unlikely event a replacement is required, return the unit to the 
place of purchase for a free replacement.

The foregoing obligation is Balkamp Inc.'s sole liability under this or any implied warranty, and under no circumstances will Balkamp Inc. be liable for any incidental or 
consequential damages.

PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. 

SAVE THIS MAN U AL FOR FUTURE REF ER ENCE.

Summary of Contents for 776-1005














Reviews: