everActive NC 1000M, User Manual

Page: 10 / 40

10
5. Power supply.
Power adapter is not supplied within a standard set.
This charger should be used with certified USB 5V DC, min.
2.0A power adapters only. We recommend using
everActive SC series of adapters (like SC-200). When the
charger is powered on, LCD display turns ON with all the
symbols visible. Affter 2s the charger will perform a self-
test and if there are no batteries inserted the “null” label
should appear.
6. Basic operation.
Once rechargeable battery is inserted, its voltage level
and default operating mode will be shown on the LCD
display. If not interrupted by “Mode” and “Current”
buttons within 8 seconds the charger will automatically
start the default charge process with 0.50A current. During
the first 8 seconds operation mode can be changed for all
newly installed batteries simultaneously by pressing the
“Mode” button. Similarly pressing the “Current” button
will change the electric current for all of the newly
inserted batteries. These changes can be also made
individually for each charging slot by selecting “Slot”
before pressing “Mode” or “Current” buttons.
Defective or overdischarged batteries (“0” voltage)
batteries will show an “ERR” label on the LCD and due to
safety reasons no further operation will be possible. If the