EVER POWERLINE RT PLUS 6000 / 10000 UPS Operating Manual
2020-03-20 13:06
Pomoc Techniczna, tel.: +48 61 6500 400
30
INSTALING THE UPS UNIT
When selecting the place and method of installation, always take into consideration
the considerable weight of the UPS unit. The UPS unit should only be used in
premises where the dust, temperature, and humidity levels are within the
specification. Appropriate cooling conditions must be provided to ensure correct
o
peration of the UPS unit. For this reason, the UPS unit’s vents and venting openings
must be uncovered and free of obstruction at all times. Minimum distance between
the UPS unit and other objects should not be less than 10 cm.
Connecting elements
Fig 14: Connecting elements
IN
– input connections
L
– input phase line
N
– input neutral line
– protective earthing point
OUT
– output connections
L
– output phase line
N
– output neutral line
– protective earthing point
Connection is done by screwing ends of each wire to the connectors. Always use the
wire gauges as specified in the installation instructions. Conductor terminals should
always be protected by suitable metal conectors.
The electrical installation must be designed to enable disconnection (isolating) of the
power supply connection point from the mains.
Summary of Contents for POWERLINE RT PLUS 10000
Page 1: ......
