20
21
Safety stop
The dose that can be set on the D-
mine
®
Pen is limited to the amount remaining in the cartridge. If the amount of medicine
left in the cartridge is no longer sufficient for the desired dose, the dosage wheel cannot be turned any further in a clockwise
direction.
•
Do not try to force the dosage wheel to turn further.
•
Note the remaining dose that can be dispensed and inject.
•
Change the cartridge and pen needle, and carry out function checks (Chapter “Priming / Function Check” step 1 – 4).
•
Dial and inject the outstanding dose.
General
Do not use the D-
mine
®
Pen if it is damaged or if you have any doubts about its correct functioning.
Once the cartridge has been inserted, it can remain in your D-
mine
®
Pen until empty. Please follow the storage instructions
provided by the manufacturer of your medication.
When changing the cartridge you should ensure that a new cartridge is inserted into the cartridge sleeve. Partially used
cartridges may not be inserted into the cartridge sleeve.
You must use a new needle with each injection because the needles
•
are sterile and may be used just once in order to avoid infections
•
may become blunt after each usage and therefore more painful to use
Please follow local regulations in your country concerning the handling of potentially infectious materials.
