47
Meters
The H9000 offers a set of 8 dedicated 3-segment hardware LED meters, positioned
above the front panel color display. These LED meters are always active.
The first segment of the hardware LED meter represents signal presence, at any dB
level. The second segment, if lit, means the signal is reaching -6dB – in other words,
nominal headroom and nominal S/N ratio. The third segment represents a signal
overload, or too much signal presence.
For a more detailed metering view, press the front panel Meters button to switch the
color display to the Meters page.
The Meters page displays 8 channels of metering at a time, and allows you to assign
which signal sources are assigned to the metering display.
Assigning Input/Output sources to Meters
On the main metering page, use the cursor buttons or the wheel to navigate to
the metering slot you wish to assign an audio input or output to.
Press the Enter key, or the Assign soft key, to make an assignment.
You will be presented with a list of all physical input channels; use the cursor
up/down buttons or wheel to navigate to the physical input you wish to assign.
