19
Things to Know About Signal Routing
There are a few general “rules” about signal routing in the H9000 which are useful
to keep in mind.
●
You can only use one of the following digital audio protocols at any given
time:
○
AES3 (aka AES/EBU) over the DB25 connector
○
AES3 (aka AES/EBU) over the XLR connector
○
S/PDIF over the optical connector
○
S/PDIF over the RCA connector
○
ADAT over the optical connector
●
When using S/PDIF over the optical ADAT connectors, you can only work at
sample rates of 44.1kHz and 48kHz. 88.2kHz and 96kHz are not supported.
●
FX Chains support 8 inputs and 8 outputs. However, the eight outputs of an
FX Chain can be “multed” to an arbitrary number of physical Input/Output
channels, computer audio interface channels, etc.